GL series micro-heating regeneration adsorption drier
.jpg)
■Stable outlet pressure dew point(-40℃)
■Minimum regeneration gas consumption (3-7℃)
■Long service life
■The most appropriate size
■Easy to operate
■Convenient for maintenance
■Accurate regeneration air flow control
■Intelligent computer control
Use conditions and technical parameters
◆Rated inlet temperature: ≤38℃
◆Maximum inlet temperature: ≤49℃
◆Inlet oil content: ≤0.1ppm
◆Nominal pressure dew point: -40℃(-60℃ product optional)
◆Adsorbent:Activated aluminium oxide or molecular sieve
◆Rated working pressure: 0.6-1.0Mpa
◆Pressure loss: 0.02Mpa
◆Control mode: Microcomputer automatic control (standard configuration) PLC optional
◆Manner of working: AB tower continuously automatic shift
◆Regenerative way: Micro-heating regeneration
◆Regeneration gas consumption: 3-7%
◆Cycle period: 480min adjustable
.jpg)
| Model |
Working pressure Mpa |
Air process load Nm3/min |
Heater power (kw) |
Height (mm) |
Width (mm) |
Depth (mm) |
Flange diameter |
Weight (kg) |
Voltage (V) |
| GLR-165 | 0.6-1.0 | 5 | 1.5 | 2185 | 890 | 850 | DN40 | 300 | 220 |
| GLR-260 | 0.6-1.0 | 7.4 | 2 | 2150 | 1000 | 1000 | DN40 | 450 | 220 |
| GLR-370 | 0.6-1.0 | 11 | 3 | 2220 | 1200 | 1100 | DN50 | 580 | 380 |
| GLR-450 | 0.6-1.0 | 13 | 4 | 2250 | 1200 | 1100 | DN50 | 650 | 380 |
| GLR-590 | 0.6-1.0 | 17 | 5 | 2450 | 1200 | 1100 | DN65 | 1200 | 380 |
| GLR-750 | 0.6-1.0 | 21 | 6 | 2450 | 1400 | 1100 | DN65 | 1350 | 380 |
| GLR-930 | 0.6-1.0 | 27 | 8 | 2468 | 1400 | 1200 | DN65 | 1600 | 380 |
| GLR-1130 | 0.6-1.0 | 32 | 10 | 2600 | 1500 | 1400 | DN80 | 1800 | 380 |
| GLR-1350 | 0.6-1.0 | 40 | 12 | 2740 | 1650 | 1300 | DN0 | 2100 | 380 |
| GLR-1550 | 0.6-1.0 | 45 | 14 | 2910 | 1650 | 1300 | DN100 | 2300 | 380 |
| GLR-1650 | 0.6-1.0 | 50 | 15 | 2570 | 000 | 1500 | DN100 | 2600 | 380 |
| GLR-2100 | 0.6-1.0 | 60 | 16 | 2600 | 2100 | 1500 | DN100 | 3000 | 380 |
| GLR-2550 | 0.6-1.0 | 70 | 18 | 2827 | 2100 | 1600 | DN125 | 3500 | 380 |
| GLR-3000 | 0.6-1.0 | 86 | 22 | 2800 | 2200 | 1900 | DN125 | 4000 | 380 |
| GLR-4100 | 0.6-1.0 | 110 | 28 | 3100 | 2400 | 1900 | DN150 | 4800 | 380 |
| GLR-5600 | 0.6-1.0 | 155 | 40 | 3150 | 2880 | 2100 | DN150 | 6600 | 380 |
| GLR-7350 | 0.6-1.0 | 210 | 55 | 3390 | 3000 | 2300 | DN200 | 8500 | 380 |
| GLR-9100 | 0.6-1.0 | 260 | 72 | 3700 | 3330 | 2500 | DN250 | 10500 | 380 |
| GLR-10850 | 0.6-1.0 | 310 | 90 | 3797 | 3670 | 2500 | DN250 | 11500 | 380 |
| GLR-12250 | 0.6-1.0 | 350 | 108 | 3700 | 4000 | 2900 | DN300 | 12800 | 380 |
| GLR-14700 | 0.6-1.0 | 420 | 126 | 4026 | 4300 | 3200 | DN300 | 15300 | 380 |
| GLR-15800 | 0.6-1.0 | 460 | 144 | 4276 | 4300 | 3200 | DN300 | 16700 | 380 |
| GLR-17500 | 0.6-1.0 | 500 | 162 | 4480 | 4500 | 3400 | DN400 | 17200 | 380 |
| GLR-22750 | 0.6-1.0 | 650 | 198 | 4885 | 4960 | 3630 | DN400 | 19500 | 380 |
Previous: GL heatless regeneration adsorption drier
Next: GL series low dew point combined compressed air dryer
