GL freezing compressed air dryer-Water cooling high temperature type
Water cooling high temperature type
Use conditions and technical parameters
◆Inlet temperature: ≤80℃
◆Type of cooling: Water cooling
◆Rated working pressure: 0.7-1.0Mpa
◆Pressure loss: 0.002Mpa
◆Nominal pressure dew point: 2℃
◆Water inlet temperature: ≤32℃
◆Cooling water pressure: 0.15-0.5Mpa
◆Cooling water: Industrial circulating water
| Model |
Air process load Nm3/min |
Power (kw) |
Working pressure Mpa |
Inlet and outlet diameter | Cooling-water pipe diameter |
Cooling water consumption T/H |
Dimension L×W×H |
Weight (kg) |
Voltage (V) |
| GL-100WT | 11 | 2.21 | 0.7-1.0 | DN50 | 1" | 4 | 1300×700×1270 | 360 | 380 |
| GL-120WT | 13 | 2.58 | 0.7-1.0 | DN50 | 1" | 5 | 1300×700×1270 | 400 | 380 |
| GL-150WT | 17 | 2.94 | 0.7-1.0 | DN65 | 1" | 6 | 1360×820×1500 | 700 | 380 |
| GL-200WT | 22 | 3.68 | 0.7-1.0 | DN80 | 1" | 7 | 1400×820×1500 | 750 | 380 |
| GL-250WT | 27 | 4.41 | 0.7-1.0 | DN80 | 1" | 9 | 1400×820×1500 | 800 | 380 |
| GL-300WT | 32 | 5.52 | 0.7-1.0 | DN100 | 1 1/2" | 10 | 1500×830×1700 | 1000 | 380 |
| GL-400WT | 43 | 7.35 | 0.7-1.0 | DN100 | 1 1/2" | 14 | 1500×830×1700 | 1500 | 380 |
| GL-500WT | 55 | 8.82 | 0.7-1.0 | DN125 | 1 1/2" | 17 | 2000×1200×1900 | 1100 | 380 |
| GL-600WT | 65 | 11.03 | 0.7-1.0 | DN125 | 1 1/2" | 20 | 2000×1200×1900 | 1500 | 380 |
| GL-700WT | 72 | 13.23 | 0.7-1.0 | DN125 | 1 1/2" | 20 | 2400×1200×2100 | 1500 | 380 |
| GL-800WT | 86 | 14.70 | 0.7-1.0 | DN150 | 2" | 25 | 2400×1200×2100 | 1700 | 380 |
| GL-1000WT | 110 | 18.38 | 0.7-1.0 | DN150 | 2" | 30 | 2400×1200×2100 | 2000 | 380 |
| GL-1200WT | 120 | 22.05 | 0.7-1.0 | DN150 | 2" | 32 | 3100×1200×2300 | 3000 | 380 |
| GL-1500WT | 155 | 29.40 | 0.7-1.0 | DN200 | 2 1/2" | 40 | 3100×1400×2500 | 3500 |
Note: pressure technical standard 0.7Mpa, inlet temperature: ≤45℃, air-cooling environment temperature: ≤38℃, cooling water temperature≤32℃.
Previous: GL freezing compressed air dryer-Water cooling normal temperature type
Next: Freezer dryer selection guide
