GL freezing compressed air dryer-Air-cooling normal temperature type
.jpg)
Air-cooling normal temperature type
Use conditions and technical parameters
◆Inlet temperature: ≤45℃
◆Environmental temperature: ≤38℃
◆Type of cooling: Air-cooling
◆Rated working pressure: 0.7-1.0Mpa
◆Pressure loss: 0.002Mpa
◆Nominal pressure dew point: 2℃
| Model |
Air process load Nm3/min |
Power (kw) |
Working pressure Mpa |
Inlet and outlet diameter |
Dimension L×W×H |
Weight (kg) |
Voltage (V) |
| GL-10A | 1.2 | 0.305 | 0.7-1.0 | 3/4" | 380×480×680 | 40 | 220 |
| GL-20A | 2.3 | 0.631 | 0.7-1.0 | 3/4" | 380×480×680 | 50 | 220 |
| GL-30A | 3.6 | 0.90 | 0.7-1.0 | 1" | 380×480×680 | 55 | 220 |
| GL-40A | 4.2 | 1.05 | 0.7-1.0 | 1 1/2" | 830×500×670 | 70 | 220 |
| GL-60A | 6.5 | 1.30 | 0.7-1.0 | 1 1/2" | 900×500×850 | 150 | 220 |
| GL-80A | 8.2 | 1.67 | 0.7-1.0 | 1 1/2" | 960×500×850 | 220 | 220 |
| GL-100A | 11 | 2.51 | 0.7-1.0 | DN50 | 1300×500×1000 | 230 | 220 |
| GL-120A | 13 | 2.88 | 0.7-1.0 | DN50 | 1300×500×1000 | 250 | 220 |
| GL-150A | 17 | 3.44 | 0.7-1.0 | DN65 | 1360×820×1100 | 280 | 380 |
| GL-200A | 22 | 4.18 | 0.7-1.0 | DN80 | 1500×820×1300 | 480 | 380 |
| GL-250A | 27 | 4.91 | 0.7-1.0 | DN80 | 1500×820×1300 | 550 | 380 |
| GL-300A | 32 | 6.32 | 0.7-1.0 | DN100 | 1500×830×1720 | 750 | 380 |
| GL-400A | 43 | 8.15 | 0.7-1.0 | DN100 | 1500×830×1900 | 900 | 380 |
| GL-500A | 55 | 9.37 | 0.7-1.0 | DN125 | 2000×1200×1900 | 1100 | 380 |
| GL-600A | 65 | 12.03 | 0.7-1.0 | DN125 | 2100×1200×2100 | 1500 | 380 |
| GL-700A | 72 | 14.73 | 0.7-1.0 | DN125 | 2100×1200×2100 | 1700 | 380 |
| GL-800A | 86 | 16.78 | 0.7-1.0 | DN150 | 2400×1300×2100 | 2000 | 380 |
| GL-1000A | 110 | 21.38 | 0.7-1.0 | DN150 | 2400×1300×2100 | 2400 | 380 |
| GL-1200A | 120 | 25.00 | 0.7-1.0 | DN150 | 2550×1500×2100 | 2700 | 380 |
1.5Mpa~4.0Mpa can be customized
Previous: Heat exchange system and gas-water separator
Next: GL freezing compressed air dryer-Air-cooling high temperature type
